
Certificate of Quality
- Particularly suitable for Long overhang and labile clamping
- Best results with DL-HM extension
Your current product selection:

Duo-Lock™ HAIMER MILL Power Series - F1004MN Chamfer
Certificate of Quality
- Particularly suitable for Long overhang and labile clamping
- Best results with DL-HM extension
Duo-Lock™ HAIMER MILL Power Series - F1004MN Chamfer
Solid carbide milling head with Duo- Lock™ interface for maximum stability, load capacity and runout accuracy.
- Particularly suitable for long overhang and labile clamping
- Best results with carbide extension
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Best length repeatability
- Polished flute and relief
Technical data subject to change without prior notice.
Characteristics
-
Helix angle 36,5/38,5Order no. -
-
Corner chamfer 45°Order no. -
-
Teeth 4Order no. -
Application
-
Feed direction (Side milling, Ramping, Driling)Order no. -
-
Ramping 3-5°Order no. -
-
SlottingOrder no. -
-
Side millingOrder no. -
Coolant
-
EmulsionOrder no. -
-
Cold airOrder no. -
-
Dry machiningOrder no. -
-
Minimal lubricationOrder no. -
Application Range - Material
-
Main Material:
-
NF metalsOrder no. -Aluminium and other non-ferrous metals, non ferrous materials
-
Also suitable for:
-
Cast ironOrder no. -Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
-
High temperature alloys and titanium alloysOrder no. -Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
-
Stainless steelOrder no. -Stainless austenitic steel and austenitic-ferritic steel and cast steel
-
SteelOrder no. -All types of steel and cast steel, with the exception of steel with an austenitic structure
Technical drawing

Technical data
Order No. | |
---|---|
DL10F1004MN1000CD- | |
DL12F1004MN1200CD- | |
DL16F1004MN1600CD- | |
DL20F1004MN2000CD- | |
DL25F1004MN2500CD- | |
DL32F1004MN3200CD- |
Duo-Lock™ size | D1 (f9) [mm] | Cutting edge | L1 max. [mm] | L [mm] | D2 [mm] | AF [mm] | Torque [Nm] | HAIMER quality | Downloads |
---|---|---|---|---|---|---|---|---|---|
DL10 | 10.00 | C | 15 | 20 | 9.6 | SW8 | 20 | CD- | DXF | Step |
DL12 | 12.00 | C | 18 | 24 | 11.5 | SW9.5 | 30 | CD- | DXF | Step |
DL16 | 16.00 | C | 24 | 32 | 15.5 | SW13 | 60 | CD- | DXF | Step |
DL20 | 20.00 | C | 30 | 40 | 19.3 | SW16 | 80 | CD- | DXF | Step |
DL25 | 25.00 | C | 37.5 | 50 | 24.0 | SW21 | 100 | CD- | DXF | Step |
DL32 | 32.00 | C | 48 | 64 | 31.0 | SW28 | 130 | CD- | DXF | Step |