Find your representative

Find your representative

  find
Find topic
Change language

HAIMER PSC 63 Shrink Fit Chuck Standard

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm
  • All functional surfaces fine machined
  • More accurate than DIN
Your current product selection:
HAIMER PSC 63 Shrink Fit Chuck Standard

Shrink Fit Chuck Standard Version
ISO 26623 · HAIMER PSC 63

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm
  • All functional surfaces fine machined
  • More accurate than DIN

Shrink Fit Chuck Standard Version
ISO 26623 · HAIMER PSC 63

Shrink fit chuck suitable to all kind of shrink fit units.

ISO 26623

  • Interface with a unique tapered polygon and flange location face
  • Exact positioning in the circumferential direction
  • Highest runout accuracy, torque and rigidity
  • Innovative modular tool system with highest precision
  • Suitable for both turning and milling centres
  • Included in delivery: Back-up screw
  • Cooling with Cool Jet for an extra charge
  • Cooling with Cool Flash for an extra charge

Technical data subjects to change without prior notice.

Features Shrink Fit Chuck Standard

The most important features:

  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Features Shrink Fit Chuck Standard

The most important features:

  • 1. High runout accuracy (< 0.003 mm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet for Shrink Fit Chucks (optional)

Cool Jet (optional)

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Jet for Shrink Fit Chucks (optional)

Cool Jet (optional)

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 6 mm
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 6 - 25 mm

Technical drawing

HAIMER PSC 63 Shrink Fit Chuck Standard Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [mm] 3
Ø D2 [mm]10
Ø D3 [mm]-
L [mm]9
Order No. Gage length A in mm    
CC6.140.03 HAIMER PSC C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm

Without back-up screw, without threads for balancing screws, with slits along the clamping bore for cooling from outside
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection
CC6.147.03.1 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm

With slits along the clamping bore
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.03.1 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm

Without slits along the clamping bore
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 4
Ø D2 [mm]10
Ø D3 [mm]-
L [mm]12
Order No. Gage length A in mm    
CC6.140.04 HAIMER PSC C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm

Without back-up screw, without threads for balancing screws, with slits along the clamping bore for cooling from outside
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection
CC6.147.04.1 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm

With slits along the clamping bore
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.04.1 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm

Without slits along the clamping bore
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 5
Ø D2 [mm]10
Ø D3 [mm]-
L [mm]15
Order No. Gage length A in mm    
CC6.140.05 HAIMER PSC C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm

Without back-up screw, without threads for balancing screws, with slits along the clamping bore for cooling from outside
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection
CC6.147.05.1 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm

With slits along the clamping bore
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.05.1 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm

Without slits along the clamping bore
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 6
Ø D2 [mm]21
Ø D3 [mm]27
L [mm]36
Order No. Gage length A in mm    
CC6.140.06 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.06 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.06 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.06 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.06 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 8
Ø D2 [mm]21
Ø D3 [mm]27
L [mm]36
Order No. Gage length A in mm    
CC6.140.08 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.08 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.08 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.08 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.08 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 10
Ø D2 [mm]24
Ø D3 [mm]32
L [mm]42
Order No. Gage length A in mm    
CC6.140.10 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.10 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.10 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.10 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.10 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 12
Ø D2 [mm]24
Ø D3 [mm]32
L [mm]47
Order No. Gage length A in mm    
CC6.140.12 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 80.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
CC6.141.12 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
CC6.147.12 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.12 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
CC6.142.12 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
Clamping Ø D1 [mm] 14
Ø D2 [mm]27
Ø D3 [mm]34
L [mm]47
Order No. Gage length A in mm    
CC6.140.14 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 85.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.14 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.14 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.14 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.14 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 16
Ø D2 [mm]27
Ø D3 [mm]34
L [mm]50
Order No. Gage length A in mm    
CC6.140.16 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 85.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.16 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.16 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.16 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.16 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 18
Ø D2 [mm]33
Ø D3 [mm]42
L [mm]50
Order No. Gage length A in mm    
CC6.140.18 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 85.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.18 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.18 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.18 HAIMER PSC C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 20
Ø D2 [mm]33
Ø D3 [mm]42
L [mm]52
Order No. Gage length A in mm    
CC6.140.20 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 85.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.141.20 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.20 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.20 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.20 HAIMER PSC C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  5. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 25
Ø D2 [mm]44
Ø D3 [mm]53
L [mm]58
Order No. Gage length A in mm    
CC6.140.25 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 90.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.147.25 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG120 Pictogram
ZG120, 120.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  2. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.25 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.25 HAIMER PSC C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Cool Flash upgrade incl. Cool Jet bores

    Cool Flash upgrade incl. Cool Jet bores

    Upgrade of the Cool Flash cooling system on tool holders including the mounting of Cool Jet cooling bores
    Order No.: 91.100.41

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 32
Ø D2 [mm]44
Ø D3 [mm]53
L [mm]58
Order No. Gage length A in mm    
CC6.140.32 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard short Pictogram
short, 95.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  2. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  3. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  4. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  5. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.144.32 HAIMER CAPTO™ C6 Shrink Fit Chuck Standard ZG130 Pictogram
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  4. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  5. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
CC6.142.32 HAIMER PSC C6 Shrink Fit Chuck Standard oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  3. Cool Jet

    Cool Jet

    Cool Jet is available in the following versions:
    Order No.: 91.100.24 (2 bores; Shrink fit chucks Ø 6 - 14 mm)
    Order No.: 91.100.25 (3 bores; Shrink fit chucks Ø 16 - 32 mm)
    Order No.: 91.100.26 (4 bores)

  4. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  5. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Product wishlist