Certificate of Quality
- Chuck fine balanced G2.5 at 22.000 rpm
- All functional surfaces fine machined
- Taper tolerance AT3
- Coolant supply form AD
Your current product selection:
Weldon Tool Holder with Cool Jet
similar DIN ISO 7388-1 SK40 with face contact (formerly DIN 69871)
Certificate of Quality
- Chuck fine balanced G2.5 at 22.000 rpm
- All functional surfaces fine machined
- Taper tolerance AT3
- Coolant supply form AD
Weldon Tool Holder with Cool Jet
similar DIN ISO 7388-1 SK40 with face contact (formerly DIN 69871)
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
Similar to DIN 6359-2 with taper SK40 with face contact form AD DIN ISO 7388-1 (formerly DIN 69871).
Form AD means: interior coolant supply through centre.
- Additional support on the flange surface for more rigidity
- Included in delivery: Clamping screw
- Coolant supply only available in form AD
- Cool Jet coolant bores included
Each item is subject to a minimum purchase quantity of 3 pcs.
Technical data subjects to change without prior notice.
Cool Jet
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
Cool Jet
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
Technical drawing
Please select your clamping diameter:
| Clamping Ø D1 [mm] | 6 |
|---|---|
| Ø D2 [mm] | 25 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| 40P.301.06.2 |  long, 100.00 mm Also suitable for ANSI-CAT |
|
|
Accessory |
| Clamping Ø D1 [mm] | 8 |
|---|---|
| Ø D2 [mm] | 28 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| 40P.301.08.2 |  long, 100.00 mm Also suitable for ANSI-CAT |
|
|
Accessory |
| Clamping Ø D1 [mm] | 10 |
|---|---|
| Ø D2 [mm] | 35 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| 40P.301.10.2 |  long, 100.00 mm Also suitable for ANSI-CAT |
|
|
Accessory |
| Clamping Ø D1 [mm] | 12 |
|---|---|
| Ø D2 [mm] | 42 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| 40P.300.12.2 |  short, 63.00 mm Also suitable for ANSI-CAT |
|
|
Accessory | ||
| 40P.301.12.2 |  long, 100.00 mm Also suitable for ANSI-CAT |
|
|
Accessory |
