Mini Shrink Chuck
DIN 69893-5 · HSK-E25

Shrink fit chuck suitable to all inductive shrink fit units.

Low cutting forces at highest rpm are characterizing the micro machining (die & mold, medical engineering, micro mechanical engineering). The slim and short design of the all new HSK–E25 series from HAIMER - which is well known from the HAIMER Mini Shrink tool holders – is perfectly suitable for the requirements of micro machining.

No disturbing edges, also jobs difficult to access are penetrable
Highest runout accuracy: < 0.003 mm
Ideal to shrink with the HAIMER Power Clamp Nano

Available for:

Mini Shrink Toolholders (Ø 3 - 12) in two different lengths

Technical data subjects to change without prior notice.

Features Shrink Fit Chuck Mini Shrink Chuck

The most important features:

1. High runout accuracy (< 0.003 mm)
2. Extreme clamping torque by high pressing in the clamping bore
3. Very slim design with 3° contour – for jobs difficult to access
4. Standard with 3 mm wall thickness and extra slim with 1,5 mm wall thickness
5. Short chamfer

The most important features:

1. High runout accuracy (< 0.003 mm)
2. Extreme clamping torque by high pressing in the clamping bore
3. Very slim design with 3° contour – for jobs difficult to access
4. Standard with 3 mm wall thickness and extra slim with 1,5 mm wall thickness
5. Short chamfer

HSK-E25 Shrink Fit Chuck Mini Shrink Chuck Technical Drawing

Clamping Ø D1 [mm]	3
Ø D2 [mm]	9
Ø D3 [mm]	-
L [mm] ultra short	15
L [mm]	15

Order No.

Gage length A in mm

E25.185.03

ultra short, 35.00 mm

Only shrinkable with Power Clamp Nano

DXF

Step

Find your representative

Find your representative

Certificate of Quality

Mini Shrink ChuckDIN 69893-5 · HSK-E25

Certificate of Quality

Mini Shrink ChuckDIN 69893-5 · HSK-E25

The most important features:

The most important features:

Technical drawing

Please select your clamping diameter:

Mini Shrink Chuck
DIN 69893-5 · HSK-E25

Mini Shrink Chuck
DIN 69893-5 · HSK-E25