Shrink fit machine Power Clamp Premium
Power Clamp Premium is a shrink fit device for perfectionists. It brings together a perfect handling and simultaneous cooling at up to five cooling bodies. The cooling bodies are fixed to linear guides. They are centered while cooling and founded on the hot shrink fit chuck.
- With standard coil V2008 and interchangable stop discs
- Integrated contact cooling with five cooling bodies
- Attachement of the cooling bodies at linear guides
- Centered move-down of teh cooling bodies onto the tool holder
- No damage at the edges of the cutting tool
- Integrated drawer
- Tools: solid carbide and HSS from Ø 3 – 32 mm
- Power: 13 kW
Included in delivery: Shrink fit machine Power Clamp Premium; Cooling Manager; 2 precision base holders; 2 precision chuck supports
Technical data subject to change without prior notice.
Picture shows Power Clamp Premium with optional NG coil and length presetting.
Standard coil V2008
The standard coils have been proven for years with interchangeable stop disks. All shrink fit chucks with a diameter of 3 - 32 mm can be heated with a single coil. Just 5 stop disks are enough to adapt the coil to each chuck, from the smallest to the largest.
Cooling body for rapid cooling
- Cooling in record time: approx. 30 s
- Tool holders remain dry;n no build-up of rust
- Gentle handling of chuck by even cooling; runout accuracy is maintained
- Hot points are always covered, no risk of injury
TME Intelligent Cooling System with Temperature Control
- Sensor in aluminium body measures temperature.
- If temperature is too high: red light
- If temperature is at right level: green light
- Minimizing danger of injury due to hot chucks
- Patented temperature control
System cart (optional)
- Trolley for shrinking machine and accessories
- For a clear and tidy work space
- Ergonomic work height
- Everything at hand
- Optional: Drawers with inserts to store accessories
- Optional unshrinking device for broken tools
- Set with 1 base holder and 6 pins (3 diameters in 2 lengths each)
Mini Shrink shrink and cooling sleeves (optional)
- Protects Mini Shrink chucks from overheating
- Extends lifetime of shrink fit chucks
- Secure and user friendly handling
- Only one parameter setting for all Mini Shrink chucks
- Cooling with standard cooling body
Standard coil V2008Order no.Incl. 5 stop discs
Integrated contact coolingOrder no. -Contentrated cooling due to water-cooled cooling bodies.
Cooling managerOrder no.Switch unit for integrated contact cooling.
2 precision base holders und 2 precision chuck supportOrder no.Chuck support in all actual tapers.
TME Cooling system for 13 kW machinesOrder no. 80.105.19.00Intelligent Cooling System with temperature sensor.
|Mains voltage||3 x 400–480 Volt, 16 Ampere, 13 kW|
|Maximum length of shrink fit chuck [mm]||475|
|Dimensions [mm]||1150 x 800 x 2000|
|Tools||Solid carbide and HSS|
|Tool diameter [mm]||3-32|