Shrink fit machine Power Clamp Premium Plus
The Power Clamp Premium Plus is a high-end shrink fit device for absolute process security with two separated electronic units and two coils. The cooling bodies are fixes to linear guides. The cooling process is temperature controlled and ends automatically.
- With intelligent coil VS32-M and 20 kW coil
- Integrated contact cooling with six cooling bodies
- Attachement of the cooling bodies at linear guides
- Centered move-down of the cooling bodies onto the tool holder
- No damage at the edges of the cutting tool
- Automatic move-up of the cooling bodies after the termination of the cooling process (temperature-time controlled)
- Two length presetting units with height stop
- Tools: solid carbide and HSS from Ø 3 – 50 mm
- Power: ca. 33 kW
Included in delivery: Shrink fit machine Power Clamp Premium Plus; Cooling Manager; 2 precision base holders; 2 precision chuck supports
Technical data subject to change without prior notice.
Cooling body for rapid cooling
- Cooling in record time: approx. 30 s
- Tool holders remain dry;n no build-up of rust
- Gentle handling of chuck by even cooling; runout accuracy is maintained
- Hot points are always covered, no risk of injury
TME Intelligent Cooling System with Temperature Control
- Sensor in aluminium body measures temperature.
- If temperature is too high: red light
- If temperature is at right level: green light
- Minimizing danger of injury due to hot chucks
- Patented temperature control
- Optional unshrinking device for broken tools
- Set with 1 base holder and 6 pins (3 diameters in 2 lengths each)
Mini Shrink shrink and cooling sleeves (optional)
- Protects Mini Shrink chucks from overheating
- Extends lifetime of shrink fit chucks
- Secure and user friendly handling
- Only one parameter setting for all Mini Shrink chucks
- Cooling with standard cooling body
Coil 20 kWOrder no. 80.151.10Coil for shrinking of tool holders with Ø 40 - 50 mm.
Motor coil VS32-MOrder no.Intelligent NG coil with automatic setting of the shrinking parameter.
Integrated contact coolingOrder no. -Contentrated cooling due to water-cooled cooling bodies.
TME Cooling system for 20 kW machinesOrder no. 184.108.40.206Intelligent Cooling System with temperature sensor.
Cooling managerOrder no.Switch unit for integrated contact cooling.
2 precision base holders und 2 precision chuck supportOrder no.Chuck support in all actual tapers.
2 Length presetting units with height stopOrder no.For presetting of the tool into the desired position.
|Mains voltage||3 x 400 Volt, 63 Ampere, 33 kW|
|Maximum length of shrink fit chuck [mm]||535|
|Dimensions [mm]||1600 x 2300 x 850|
|Tools||Solid carbide and HSS|
|Tool diameter [mm]||3 - 50|