Shrink fit machine Power Clamp Economic Plus
High performance shrink fit machine for all tools.
- With standard coil V2008 and interchangable stop discs
- Single chuck version
- With integrated contact cooling
- Tools: Solid carbide and HSS from Ø 3 – 32 mm
- Power: 13 kW
Included in delivery: Shrink fit machine Power Clamp Economic Plus; Cooling Manager; 1 base holder; 1 chuck support
Technical data subject to change without prior notice.
Standard coil V2008
The standard coils have been proven for years with interchangeable stop disks. All shrink fit chucks with a diameter of 3 - 32 mm can be heated with a single coil. Just 5 stop disks are enough to adapt the coil to each chuck, from the smallest to the largest.
Cooling body for rapid cooling
- Cooling in record time: approx. 30 s
- Tool holders remain dry;n no build-up of rust
- Gentle handling of chuck by even cooling; runout accuracy is maintained
- Hot points are always covered, no risk of injury
TME Intelligent Cooling System with Temperature Control (optional)
- Sensor in aluminium body measures temperature.
- If temperature is too high: red light
- If temperature is at right level: green light
- Minimizing danger of injury due to hot chucks
- Patented temperature control
System cart (optional)
- Trolley for shrinking machine and accessories
- For a clear and tidy work space
- Ergonomic work height
- Everything at hand
- Optional: Drawers with inserts to store accessories
- Optional unshrinking device for broken tools
- Set with 1 base holder and 6 pins (3 diameters in 2 lengths each)
Mini Shrink shrink and cooling sleeves (optional)
- Protects Mini Shrink chucks from overheating
- Extends lifetime of shrink fit chucks
- Secure and user friendly handling
- Only one parameter setting for all Mini Shrink chucks
- Cooling with standard cooling body
Standard coil V2008Order no.Incl. 5 stop discs
Integrated contact coolingOrder no. -Contentrated cooling due to water-cooled cooling bodies.
Cooling managerOrder no.Switch unit for integrated contact cooling.
1 base holder and 1 chuck supportOrder no.Chuck support in all actual tapers.
|Mains voltage||3 x 400-480 Volt, 16 Ampere, 13 kW|
|Maximum length of shrink fit chuck [mm]||510|
|Dimensions [mm]||860 x 970 x 650|
|Tools||Solid carbide and HSS|
|Tool diameter [mm]||3 - 32|